Popcorn Ceiling Removal Near Me: KW Guide & Pricing

Home›Blog›Pricing
★
Google Reviewed
✓
Fully Insured
W
WSIB Covered
◎
100% Dustless
⚡
Instant Quote
✦
Satisfaction Guaranteed
PricingNovember 11, 2026·28 min read·5,627 words
E

By Eddie— Owner & Lead Technician

500+ KW homes completed since 2019 · $2M liability insured · WSIB covered · Fully Ontario-certified for popcorn ceiling removal & asbestos coordination.

$2M InsuredWSIB Covered500+ Projects$2M Insured & WSIB

Published 2026-11-11. If you are searching "popcorn ceiling removal near me" in Kitchener-Waterloo, here is the short answer. A typical job here runs about $2,025 to $4,500 plus HST for 450 to 600 square feet of ceiling, and it takes 2 to 3 days. You should have the ceiling tested for asbestos first if your home was built before the late 1980s. Everything below shows how those numbers are built, so you can check any quote you receive against them, mine included.

I'm Eddie, and I've been doing this since 2019 as an owner-operator. I've completed over 500 KW homes, and I'm personally on every job. This guide covers the process, the pricing by ceiling type, the Ontario asbestos rules, and the local areas we serve, including Kitchener, Waterloo, Cambridge, Guelph, Brantford, Woodstock, Hamilton, Burlington, Milton and Oakville. It also covers the questions to ask any contractor before you sign. If you want to talk it through, call me at (519) 729-7394.

For a broader overview, our complete Ontario guide covers the province as a whole. This post is the Kitchener-Waterloo version, with local pricing and local housing stock in mind.

Why this matters now in Kitchener-Waterloo

A large share of the region's housing was built between the late 1960s and the early 1990s, which is exactly when sprayed acoustic ceilings were the default finish. Builders liked them because they hid taping flaws and went up fast. Homeowners now dislike them for the same reasons everyone else does: they collect dust and cobwebs, they catch shadows under modern lighting, they are hard to paint evenly, and they make a room feel dated the moment you put a nice floor under them.

Three things are pushing more people to act right now. First, many Waterloo Region homes from that era are changing hands, and buyers walk through with their phones out. Dated texture shows up badly in photos. Second, people who are staying put are renovating instead of moving. They are redoing kitchens, floors and lighting, and a textured ceiling undercuts all of it. Third, LED pot lights and brighter fixtures show every bump and shadow in a popcorn ceiling, so the work is often triggered by a lighting upgrade.

There is also a local-supply issue. Many companies advertising "near me" in this region are based in the GTA and drive in. That can work, but it changes scheduling, accountability and who actually shows up. I explain why I keep the work local on our why we work locally page. The short version is that the person who quotes the job is the person who does it, and when you call about the ceiling a year later, you get me.

What popcorn ceiling removal actually involves

Homeowners usually picture scraping. Scraping is maybe a fifth of the work. A ceiling that looks smooth when we leave is the result of the steps after the scraping. Here is the full sequence, and what you will experience at each stage.

Step 1: Assessment and ceiling type

The first thing I establish is what the texture is sitting on and what has been put over it. Is it unpainted, painted with latex, or painted with an oil-based paint? This matters because it changes the method and the rate. Unpainted texture absorbs water, softens and comes off cleanly. Latex-painted texture is partly sealed, so it takes more work. Oil-based paint seals the texture almost completely, so it takes the most. I check this with a small test in an inconspicuous spot. I also look at ceiling height, any water stains, cracks, existing patches and how many rooms are involved.

Step 2: Asbestos decision

If the home was built before the late 1980s, we talk about testing before any scraping happens. I cover this in detail in the asbestos section below. Nothing gets disturbed until we know the result.

Step 3: Protection and prep

This is the part customers notice least and the part that decides whether the house stays clean. Floors are covered, walls are sheeted, and furniture is either moved out or covered. Vents and fixtures are masked. Light fixtures and ceiling fans may need to come down, and I tell you in advance which ones. In most cases you can stay in the house, but the rooms being worked on are off limits.

Step 4: Removal

On unpainted texture, the surface is wetted and the texture is scraped off. The wetting keeps dust down and softens the material. Painted texture takes more effort. Done properly, the drywall paper underneath is not gouged. Gouges are what turn a straightforward job into a repair job.

Step 5: Skim coating

After removal, the ceiling is not smooth. It carries tool marks, tape lines, old patches and a chalky residue. Two skim coats of joint compound fix this. Each coat has to dry before the next goes on, and each is sanded before the finish. This is why I never promise completion in under two days. A rushed skim coat telegraphs through the paint later as ridges, shadows and hairline cracks.

Step 6: Primer and paint

Once the skim coats are sanded, the ceiling is primed and painted with two coats of Sherwin-Williams paint. Priming matters because fresh joint compound absorbs paint unevenly. Skipping primer leaves patchy flat spots you can see when light rakes across the ceiling.

Step 7: Cleanup and walkthrough

Protection comes off, the rooms are cleaned, and we walk the ceiling together with the lights on and with a work light held at a low angle. A low-angle light is the honest test of a skim coat. If you can see flaws under that light, we fix them before I leave.

One of our customers, Tobi Asekunowo, summed up what people notice afterward: "They removed the old textured ceiling, refinished it properly, and made the room look much newer. They were professional, careful in the home, and the finished result was excellent."

Pricing breakdown: what popcorn ceiling removal costs in KW

All rates below are per square foot of ceiling and are before HST. The work covered by these rates is removal, two skim coats, primer and two coats of Sherwin-Williams paint. "All-inclusive" refers to the work, not to tax. HST at 13% is added at quote time.

ServiceRate per sqft (plus HST)What it covers
Popcorn removal, unpainted texture$4.50Removal, 2 skim coats, primer, 2 coats Sherwin-Williams paint
Popcorn removal, latex-painted texture$6.50Same scope, more removal labour
Popcorn removal, oil-base painted texture$7.50Same scope, most removal labour
Skim coat only (smooth ceiling, nothing to bury)$2.50Skim coating only, no protection
Skim coat, full service with protection$3.50Skim coating with floor and room protection
Skim coat over existing texture (texture stays)$8.503 coats to bury the texture
Ceiling painting only$50 to $400 per roomPaint existing smooth ceilings
Asbestos testing$300 to $500At cost, no markup

Why skim coating over texture costs more than removal

People ask whether they can skip removal and just skim over the texture to save money. You can, but it costs more, not less. Burying a textured surface takes three coats of compound, and a lot of it, which is why the rate is $8.50 per square foot compared with $4.50 for removing and finishing unpainted texture. On a 500 square foot ceiling, that is $4,250 to bury the texture versus $2,250 to remove it and finish the ceiling, both before HST. I only recommend burying texture in specific situations, such as when asbestos is confirmed and you would rather encapsulate than remove. I explain that choice further down.

The skim-coat-only rates are for ceilings that are already smooth but marked up, such as after a repair or a drywall job. At $2.50 per square foot, you get the skim coating without room protection. At $3.50, protection is included. If you are living in the house, you want the protected version.

Minimum job size

There is a minimum billing of 300 square feet. A single small bedroom of about 144 square feet is not worth mobilizing for on its own, so smaller jobs are billed at the minimum. In practice, most homeowners bundle two or three rooms, which makes the per-square-foot rate far more reasonable.

Worked examples with the arithmetic shown

Here is how the rates turn into real totals. Every figure is square footage times the rate, then HST of 13% where shown.

  • 500 sqft, unpainted: 500 x $4.50 = $2,250, plus HST $292.50, total $2,542.50.
  • 500 sqft, latex-painted: 500 x $6.50 = $3,250, plus HST $422.50, total $3,672.50.
  • 500 sqft, oil-base painted: 500 x $7.50 = $3,750, plus HST $487.50, total $4,237.50.

That is the range a typical main-floor or condo-sized job lands in. The range I quote as "typical" is $2,025 to $4,500 plus HST, which is 450 square feet at the unpainted rate up to 600 square feet at the oil-base rate. A whole three-bedroom house is a different size entirely, covered in the room-by-room table below. For a longer breakdown focused only on pricing, see our full 2026 pricing guide for Kitchener-Waterloo.

What is included and what is not

Included in the removal rates: protection, removal, two skim coats, primer, two coats of paint, cleanup and a final walkthrough. Not included: asbestos testing, repairs for hidden damage found under the texture (such as old water damage or failed drywall tape beyond normal), electrical work such as taking down and re-hanging heavy fixtures if a licensed electrician is needed, and wall painting. If a quote has none of these exclusions spelled out, ask why.

Factors that affect the price

Painted or unpainted

This is the biggest factor, and it is why the rate ranges from $4.50 to $7.50. Many Kitchener-Waterloo ceilings were painted at least once over the years, often with whatever paint was on hand. Painted texture does not soften evenly, and oil-base paint is the hardest to work through. If you do not know which you have, I can tell from a short test on site.

Age of the home

Older homes are more likely to have been painted multiple times, more likely to have plaster-lath or old drywall behind the texture, and more likely to need asbestos testing. Homes from the 1990s onward are less likely to have asbestos in the texture, but I still recommend testing if you are not sure of the build date or whether the ceiling was ever re-sprayed or patched with older material.

Ceiling height and layout

Nine-foot ceilings and vaulted or cathedral sections take more scaffolding and more time than standard eight-foot ceilings. Stairwells and open-concept rooms with transitions need extra setup. These factors raise labour, and I note them at the assessment rather than surprising you later.

Condition under the texture

Sometimes the texture was hiding problems: ceiling patches, old stains, nail pops, cracked tape seams. Normal prep is built into the rate. Larger repairs, such as replacing a section of drywall, are quoted separately once we see them.

Number of rooms

Setup cost does not scale linearly with size. A 300 square foot job and a 600 square foot job both need protection, scaffolding and cleanup. So a bigger job is more efficient per square foot even though the rate is the same. In practice, the best way to get value is to do all the rooms in one visit instead of one room at a time over several years.

Volume

Whole-home jobs are quoted from the actual square footage, so a larger home pays more in total but the price per square foot follows the same schedule for the same ceiling type. I would rather show you the arithmetic than promise a vague discount.

Asbestos: when to worry, what testing involves, and what happens if it is found

Asbestos was used in some sprayed ceiling textures in Canada until the 1980s. Canada banned the manufacture and import of asbestos products in late 2018, but the texture on your ceiling was applied long before that, and the material is still in many older homes. The risk is not the intact ceiling. The risk is scraping, sanding or breaking the material, which can release fibres into the air. That is why you test first.

When you should test

  • Your home was built before roughly 1990, or you are not sure of the build date.
  • The ceiling has been patched, re-sprayed or repaired at some point and you do not know what material was used.
  • You are in a condo or townhouse where the original texture is intact.
  • You plan any work that will disturb the ceiling, even partial work like cutting holes for pot lights.

What testing involves

A small sample of the texture is taken from the ceiling, sealed and sent to an accredited laboratory. The lab analyzes it under a microscope. The result is positive or negative, and the report states the percentage and type of asbestos if found. Turnaround is typically a few business days, depending on the lab and whether you pay for rush service. The testing cost in my price book is $300 to $500, passed on at cost with no markup. That is the real cost of sampling and lab analysis, and I do not make money on it.

If you want to know the details, I wrote a separate walkthrough on how asbestos testing works in Ontario. For this post, the key point is that testing is not a sales tool. It is the first safety step. If you are unsure whether to test, call me at (519) 729-7394 and I will tell you honestly based on the age and history of your home.

What happens if asbestos is found

You have options. The right choice depends on the condition of the ceiling, your plans for the house and your budget.

  1. Leave it alone. Intact, undisturbed asbestos-containing texture is generally not an active hazard. If you are not renovating, leaving it is a legitimate option.
  2. Encapsulate it. This means burying the texture under skim coats without scraping it off. This is the one case where the $8.50 per square foot over-texture approach makes sense, because it avoids disturbing the material. It leaves the asbestos in place, which you would disclose if you sell.
  3. Remove it under asbestos controls. If you want it fully gone, removal has to follow Ontario's asbestos regulations, with the proper containment, protective equipment, waste handling and disposal. This is a specialist job with its own pricing, and you should be quoted on that basis, not on the standard rates in the table above.

I will not scrape a ceiling that has tested positive using the normal wet-scrape method. If a contractor offers to, walk away.

DIY versus professional removal

I am not against DIY. Some people are capable and have the time. But the honest comparison is closer than you might think on cost and further apart on risk and finish quality.

FactorDIYProfessional
Upfront costLower on paper: materials, tool rental, paintHigher: labour included
TimeOften many weekends for a 500 sqft area2 to 3 days for typical jobs, 3 to 5 for larger homes
Asbestos riskYou must test first; mistakes expose your householdTesting step built into the process
Finish qualityRidges, gouges and visible seams are commonTwo skim coats, sanded and primed
MessVery high if protection is rushedProtection is part of the job
Physical effortOverhead work for hours, hard on shoulders and neckNot your problem
WarrantyNoneOne year workmanship warranty
InsuranceYour home policy, your risk$2M commercial liability and full WSIB coverage

Hidden DIY costs

Most people budget for scrapers, a sprayer and drop sheets. They forget the things that actually add up. Mud and sanding supplies for two coats are more than people expect. Dust control, respirators with the right filters, and disposal of wet debris all cost money. A rented scaffold or planks across ladders makes a safe work platform harder than it looks. And then there is the cost of fixing it when the first attempt leaves a ceiling with visible ridges under the light. I have met homeowners who started a DIY job, got halfway through a room, and called to ask if I could take over. That is a perfectly reasonable thing to do, but it is better to know before you begin.

The tools you need

At minimum: plastic sheeting and tape, a garden sprayer, wide scrapers, a dust mask rated for fine particles, eye protection, joint compound, a wide knife set, a pole sander with dust control, primer, paint, rollers and a stable work platform. That is a real equipment list before you have removed any texture.

How to choose a contractor

There is no licence required to call yourself a ceiling contractor in Ontario, so the quality of the company is on you to check. Use these questions.

Questions to ask

  1. Do you test for asbestos before scraping? The answer should be yes for any home that could contain it. If they say they never worry about it, that is a bad sign.
  2. Who will actually be on site? You want to know whether it is the owner, employees or subcontractors.
  3. Are you insured and covered by WSIB? Ask for proof. I carry $2M commercial liability insurance and full WSIB coverage. A contractor without WSIB coverage can leave you exposed if a worker is hurt on your property.
  4. How many skim coats do you apply? Two is the honest answer for a proper finish. One coat is a shortcut.
  5. What is the timeline? A believable timeline has drying time between coats. If someone promises an entire house in less than two days, they are skipping steps.
  6. What does the warranty cover and for how long? Mine is a one year workmanship warranty.
  7. What paint is used? Ask for the brand and the number of coats.

Red flags

  • A price that is far below everyone else's without an explanation of what is being left out.
  • A quote that is not written down, or that does not state square footage or ceiling type.
  • Pressure to decide on the spot.
  • No mention of dust control, protection or asbestos.
  • No proof of insurance or WSIB.
  • Out-of-region companies that quote by phone without seeing the ceiling, then change the price on arrival.

What a real quote looks like

A good quote states the square footage of each room, the ceiling type (unpainted, latex, oil-base), the rate per square foot, what is included, what is excluded, whether HST is added, and the expected number of days. For example: "500 sqft, unpainted texture, $4.50 per sqft, $2,250 plus HST, includes removal, two skim coats, primer and two coats Sherwin-Williams paint, 2 to 3 days." If your quote is a single number with no breakdown, ask for the breakdown. A contractor who cannot give one is probably guessing.

ROI and resale value

I am careful about this topic because I do not want to give you a made-up percentage. There is no reliable published figure for the resale return on popcorn ceiling removal specifically in Ontario, and anyone who quotes you a precise number is guessing. What I can tell you is how the value works in practice.

Buyers see a room in photos before they see it in person. A smooth, bright ceiling photographs cleanly, and a textured one shows shadows and a dated look. In a market where buyers compare dozens of listings, the home that looks updated gets more showings. A popcorn ceiling is also a visible sign to a buyer that work is waiting for them, and buyers tend to price that work higher than it costs. They imagine the mess, the dust and the delay, and they discount for it.

Consider the numbers on a typical job. A 500 square foot unpainted ceiling costs $2,542.50 including HST. For a home you are about to list, that is a small line item next to the sale price. For a home you plan to live in for ten years, the cost per year is very low, and you enjoy the room every day. If you are painting the house anyway, doing the ceiling at the same time is cheaper than doing it separately, because the protection and prep serve both jobs.

Payback timing depends on your plan. If you are selling within a year, the return is mostly in how fast and how well the house sells. If you are staying, the return is comfort and the fact that you do not have to do this later at a higher price. Another customer, Ololade Hassan, put it this way about her Cambridge home: "They made the process simple, explained everything clearly, and delivered a smooth clean ceiling finish."

Why KW Popcorn Ceiling Removal & Painting

You can hire a lot of companies for this job. Here is what is specific to mine.

  • Owner-operated since 2019. I quote the job, I am on site, and I do the walkthrough. You are not handed off to a crew you have never met.
  • Over 500 KW homes completed. I know the housing stock, the ceiling types that show up in each part of the region, and where problems tend to hide.
  • Insured and covered. $2M commercial liability insurance and full WSIB coverage. If you want proof, ask and I will send it.
  • A proper process. Two skim coats, primer, two coats of Sherwin-Williams paint, and a minimum two-day schedule so the compound can dry between coats.
  • Asbestos-first approach. Testing is offered at cost with no markup, and I will not scrape a ceiling that tests positive using the standard method.
  • One year workmanship warranty. If the work I did fails within a year, I come back and deal with it.
  • Local. I live and work here, which is the point of the approach I describe on our local page.

Customers often combine ceilings with interior painting, since the prep and protection overlap. Tanya Fleet said it simply: "KW Popcorn Ceiling Removal did a fantastic job removing the popcorn ceilings for all of our rooms and painted the entire interior of the home as well. Great quality work - highly recommend!"

Service areas

I work in Kitchener, Waterloo, Cambridge, Guelph, Brantford, Woodstock, Hamilton, Burlington, Milton and Oakville. If you are searching for popcorn ceiling removal in Kitchener or in Waterloo, those are the two pages with the most local detail. Cambridge and Guelph share a lot of housing stock with Kitchener, so the pricing and process are identical. The further-out cities in the list are covered by the same rates and the same schedule of 2 to 3 days for a typical job, although I will confirm travel and scheduling when we talk.

Neighbourhood spotlight: what ceilings tend to look like in different parts of KW

I need to be clear about how I use this section. It is a general guide to housing eras, not a list of past customers. Build dates vary street by street, so the only way to know what is on your ceiling is to check the age of your home and, if it matters, test it. With that said, here is how the eras generally line up.

Forest Heights and Stanley Park, Kitchener

These are established Kitchener neighbourhoods with a lot of homes from the 1960s and 1970s. That era is squarely in the window where sprayed acoustic ceilings were common, and where asbestos in the texture is a real possibility. If you own in either area and the ceiling has never been replaced, I would plan on testing as a first step. Many of these houses have also been repainted several times, so painted texture is common. For more local detail, see our Forest Heights guide with local pricing.

Pioneer Park and Chicopee

These areas include a mix of homes from the 1970s and 1980s, with some later infill. Ceilings from this period often carry a heavier texture. Some are original and some have been re-sprayed or patched, which is exactly the situation where you cannot guess the material. Test when in doubt.

Victoria Hills and Centreville

Mixed eras again, with plenty of homes from the 1980s. The late 1980s is the grey area: some texture from that period is asbestos-free, some is not, and the only way to know is the lab result.

Doon and Grand River South

These parts of Kitchener include both older homes and newer subdivisions. Newer builds from the 1990s and later still sometimes have a popcorn finish, but asbestos is much less likely. In these homes, the main cost driver is usually ceiling height and layout, such as vaulted great rooms and open stairwells, rather than asbestos.

Bridgeport

Bridgeport has older housing mixed with newer infill, so the right approach is to check each house individually. Do not assume that because a neighbour's ceiling tested negative, yours will.

Uptown Waterloo

Uptown Waterloo has a lot of condos, older townhouses and converted homes. Condo ceilings add their own considerations, which I cover in the regulations section and in our Uptown Waterloo guide.

Room-by-room cost table

This table shows typical scenarios. Square footage is the assumed ceiling area, and each total equals square footage times the rate. All figures are before HST. Add 13% for the final price.

Scenario Assumed ceiling sqft Unpainted ($4.50) Latex-painted ($6.50) Oil-base ($7.50)
Two bedrooms (billed at the 300 sqft minimum)300];,350];,950$2,250
Living room and dining room450$2,025$2,925$3,375
Main floor or typical job500$2,250$3,250$3,750
Condo600$2,700$3,900$4,500
Finished basement700$3,150$4,550$5,250
Whole 3-bedroom house1,200$5,400$7,800$9,000

A whole three-bedroom house typically has between 900 and 1,500 square feet of ceiling. At 900 square feet, the range is $4,050 (unpainted) to $6,750 (oil-base). At 1,500 square feet, it is $6,750 to $1,250. The 1,200 square foot row in the table sits in the middle of that range. This is the only honest way to price a whole house: measure it, then multiply.

Basements deserve a note. They often have lower ceilings, which makes the work faster, but there may be ductwork, pipes and bulkheads to work around. I measure these carefully and subtract bulkheads where they are not part of the textured area. Condos can have concrete slab ceilings or drywall hung below the slab, and the approach depends on which you have. Tell me what the unit looks like and I will confirm on site.

Ontario regulations deep dive

This is a plain-language summary, not legal advice. For anything that depends on your specific situation, check with the Ministry of Labour, Immigration, Training and Skills Development or a qualified professional.

Ontario Regulation 278/05

Ontario Regulation 278/05 is the Designated Substance (Asbestos) on Construction Projects and in Buildings and Repair Operations regulation, made under the Occupational Health and Safety Act. It sets out how asbestos work must be done, including the classification of work into different types depending on how much asbestos could be released, and the precautions required for each type. Disturbing a sprayed or textured ceiling that contains asbestos is not treated like routine painting. The requirements for equipment, procedures and waste are more demanding for higher-risk operations.

Ontario Regulation 490/09

O. Reg 490/09 covers designated substances more broadly, including asbestos, and sets requirements for assessing and controlling exposure. Under the Occupational Health and Safety Act, an owner of a project is expected to determine whether designated substances are present before work begins, and to give that information to the contractor. This is the legal reason a responsible contractor asks about testing before scraping.

WSIB requirements

In Ontario, many construction businesses are required to register with the Workplace Safety and Insurance Board and keep coverage current for their workers. As a homeowner, you can ask a contractor for a WSIB clearance certificate, which shows their account is in good standing. If a worker on your property is injured and the contractor is not covered, that can create real problems. I carry full WSIB coverage, and I will provide a clearance on request.

Asbestos disposal

Asbestos-containing waste is not ordinary household garbage. It generally has to be wetted, sealed in appropriate bags or containers, labelled, and delivered to a landfill or facility that is approved to accept it. You cannot put it in your curbside bin. This is one of the reasons asbestos removal costs more than normal removal, and it is why a contractor who casually says they will "just toss it" is a risk to you.

Landlord obligations

If you rent out a property, you are responsible for maintaining it, and tenants must be given proper written notice before you or a contractor enters the unit for work. If asbestos is present, you should not let tenants live in the unit while it is being disturbed. If you are a landlord in Kitchener, Waterloo or Cambridge with older rental stock, I recommend testing before any ceiling work, and keeping the lab report on file.

Condo owners and condo corporations

Condo rules differ from building to building. Many condo corporations require approval before you do any renovation work, and some require proof of contractor insurance, specific working hours and elevator booking. The ceiling surface inside your unit is commonly the owner's responsibility, but the concrete slab itself is typically a common element. Read your declaration and bylaws, and ask the management office before booking. I can supply my insurance certificate for their file.

Project timeline: what a real job looks like day by day

The minimum job is two days, because the compound needs to dry between coats. Typical jobs run 2 to 3 days, and larger homes take 3 to 5. Here is how a typical 3-day schedule works.

Before day 1: assessment and asbestos decision

I visit, check the ceiling type, measure, and give you a written quote. If testing is needed, a sample goes to the lab and we wait for the result before booking the scrape. If your home is newer and testing is not needed, we book directly.

Day 1: protection, removal and first skim coat

I arrive, cover floors, protect walls and fixtures, and set up. I wet and remove the texture, then clean the surface. The first skim coat goes on, and I leave it to dry overnight. At the end of the day the rooms look rough, with a flat grey ceiling and no texture. This is normal.

Day 2: second skim coat, sanding and primer

The first coat is checked and sanded. The second skim coat goes on and is allowed to dry. Once dry, I sand to a smooth finish and apply primer. On a smaller job, this is where the schedule can be compressed to finish in two days total, with painting following the primer.

Day 3: paint, cleanup and walkthrough

Two coats of Sherwin-Williams paint go on, with drying time between them. Then protection comes down, the rooms are cleaned, and we do the walkthrough together under a low-angle light. Any flaw I find or you point out gets fixed before I leave. After that, the ceiling is yours, covered by the one year workmanship warranty.

Larger homes

For a full house of 1,200 square feet or more, plan on 3 to 5 days. The work is the same but the drying and sanding cycles are repeated across more rooms. I sequence the rooms so that one room is drying while I work on another, which keeps the schedule tight without rushing the compound.

Frequently asked questions

Do I need to move out during the job?

Usually not. You will not be able to use the rooms being worked on, and dust control is good but not perfect, so some people with respiratory conditions choose to stay elsewhere for a couple of days. We talk about this at the quote.

Can I remove only one room?

Yes, but there is a 300 square foot minimum, so a single small room is billed at that minimum. Bundling rooms is more efficient.

Is it cheaper to paint over the popcorn?

Painting only is $50 to $400 per room, so it is cheaper in the short term. But it leaves the texture in place and makes any future removal harder, because paint seals the texture and moves you into the higher latex or oil-base rates.

How long should I wait before painting walls?

If you also want the walls painted, it is best to do the ceiling first, because removal and sanding generate dust and drips. Many customers combine the two so the whole room is done in one pass.

What if the ceiling tests positive for asbestos?

You choose between leaving it, encapsulating it with skim coats at $8.50 per square foot, or having it professionally removed under the asbestos regulations. I will walk through all three with you and give you the numbers.

Next steps

If you want a number for your own home, the fastest way is to give me the rough square footage, the approximate age of the house, and whether the ceiling has ever been painted. I can usually give you a ballpark right away and a written quote after a short visit. If you want the wider picture first, read our full Kitchener-Waterloo guide, and then come back to the pricing table here with your own measurements.

Call me directly at (519) 729-7394, or visit kwpopcornceilingremoval.ca to request a quote. I'm personally on every job, I serve Kitchener, Waterloo, Cambridge, Guelph, Brantford, Woodstock, Hamilton, Burlington, Milton and Oakville, and I'll tell you honestly what your ceiling needs, including when the right answer is to leave it alone. Again, the number is (519) 729-7394.

E

Eddie — Owner, KW Popcorn Ceiling Removal & Painting

Eddie has personally completed 500+ ceiling removal projects across Kitchener, Waterloo, Cambridge, and Guelph since 2019. Fully licensed, $2M liability insured, and WSIB covered on every job in Ontario.

Ready for a smooth ceiling?

Free quotes for Kitchener-Waterloo, Cambridge, and Guelph homeowners.

Ready for a smooth ceiling?

Free, no-obligation quote. Most delivered same day.

(519) 729-7394
⚡ Instant Quote📞 Call Now